TRIPPLITE-12X DEFINITIONS ::= BEGIN

IMPORTS
  TRAP-TYPE
     FROM RFC-1215
  DisplayString,
  TruthValue,
  TimeStamp,
  TimeInterval,
  DateAndTime,
  AutonomousType,
  VariablePointer,
  RowStatus
    FROM SNMPv2-TC
  OBJECT-GROUP,
  NOTIFICATION-GROUP
    FROM SNMPv2-CONF
  MODULE-IDENTITY,
  OBJECT-IDENTITY,
  OBJECT-TYPE,
  NOTIFICATION-TYPE,
  Gauge32,
  Integer32,
  IpAddress
    FROM SNMPv2-SMI
  PositiveInteger,
  NonNegativeInteger
    FROM UPS-MIB
  tripplite
    FROM TRIPPLITE;

tlPowerAlert MODULE-IDENTITY
  LAST-UPDATED "201702281600Z"
  ORGANIZATION "Tripp Lite"
  CONTACT-INFO
    "Software Engineering
    Tripp Lite
    1111 W. 35th St.
    Chicago, IL 60609"
  DESCRIPTION
    "This MIB module defines MIB objects which provide mechanisms for
    remote management capabilities of Tripplite PowerAlert and related
    software."
  REVISION "201702281600Z"
    "Corrected spelling errors"
  REVISION "201507290000Z"
  DESCRIPTION
    "Removed obsolete legacy PowerAlert 11 sections"
  REVISION "201410170930Z"
  DESCRIPTION
    "Added tlUpsAggregatePowerFactor"
  REVISION "201409181000Z"
  DESCRIPTION
    "Added additional tlUpsInputSource... elements"
  REVISION "201408060830Z"
  DESCRIPTION
    "Added additional elements to tlUpsOutputCircuitTable"
  REVISION "201405080830Z"
  DESCRIPTION
    "Added tlUpsInputSourceSelect"
  REVISION "201404091000Z"
  DESCRIPTION
    "Added missing well known alarms"
  REVISION "201310301300Z"
  DESCRIPTION
    "Consolidated and Released for PAL v12.06.006x"
  
  ::= { tripplite 90 }


--------------------------------------------------------------------------
-- Enumerations
--------------------------------------------------------------------------

tlEnumerations OBJECT IDENTIFIER  ::= { tripplite 2 }

tlOperatingSystems OBJECT IDENTIFIER ::= { tlEnumerations 1 }

hpux9 OBJECT IDENTIFIER   ::= { tlOperatingSystems 1 }

sunos4 OBJECT IDENTIFIER  ::= { tlOperatingSystems 2 }

solaris OBJECT IDENTIFIER   ::= { tlOperatingSystems 3 }

osf OBJECT IDENTIFIER   ::= { tlOperatingSystems 4 }

ultrix OBJECT IDENTIFIER  ::= { tlOperatingSystems 5 }

hpux10 OBJECT IDENTIFIER  ::= { tlOperatingSystems 6 }

netbsd1 OBJECT IDENTIFIER   ::= { tlOperatingSystems 7 }

freebsd OBJECT IDENTIFIER   ::= { tlOperatingSystems 8 }

irix OBJECT IDENTIFIER  ::= { tlOperatingSystems 9 }

linux OBJECT IDENTIFIER   ::= { tlOperatingSystems 10 }

bsdi OBJECT IDENTIFIER  ::= { tlOperatingSystems 11 }

openbsd OBJECT IDENTIFIER   ::= { tlOperatingSystems 12 }

win32 OBJECT IDENTIFIER   ::= { tlOperatingSystems 13 }

hpux11 OBJECT IDENTIFIER  ::= { tlOperatingSystems 14 }

win9x OBJECT IDENTIFIER   ::= { tlOperatingSystems 50 }

winnt OBJECT IDENTIFIER   ::= { tlOperatingSystems 51 }

solspark OBJECT IDENTIFIER  ::= { tlOperatingSystems 52 }

solintel OBJECT IDENTIFIER  ::= { tlOperatingSystems 53 }

aix OBJECT IDENTIFIER   ::= { tlOperatingSystems 54 }

sco OBJECT IDENTIFIER   ::= { tlOperatingSystems 55 }

osx OBJECT IDENTIFIER   ::= { tlOperatingSystems 56 }

unknown OBJECT IDENTIFIER   ::= { tlOperatingSystems 255 }

--------------------------------------------------------------------------
-- Power Alert System Settings
--------------------------------------------------------------------------
-- tlPowerAlert OBJECT IDENTIFIER ::= { tripplite 90 }

tlPASystem OBJECT IDENTIFIER ::= { tlPowerAlert 1 }

tlPAContacts OBJECT IDENTIFIER ::= { tlPASystem 1 }

tlPAEmailContacts OBJECT IDENTIFIER   ::= { tlPAContacts 1 }

tlPANumberOfEmailContacts OBJECT-TYPE
  SYNTAX NonNegativeInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The number email contacts currently defined."
  ::= { tlPAEmailContacts 1 }

tlPAEmailContactsTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlPAEmailContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A list email contact entries. The number of entries is
    given by the value of tlPANumberOfEmailContacts."
  ::= { tlPAEmailContacts 2 }
  
tlPAEmailContactEntry OBJECT-TYPE
  SYNTAX TlPAEmailContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing email contacts information."
  INDEX { tlPAEmailContactIndex }
  ::= { tlPAEmailContactsTable 1 }

TlPAEmailContactEntry ::= SEQUENCE {
  tlPAEmailContactIndex		PositiveInteger,
  tlPAEmailContactRowStatus	RowStatus,
  tlPAEmailContactName			DisplayString,
  tlPAEmailContactAddress		DisplayString
   }

tlPAEmailContactIndex OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "This is the index number of the email contact."
  ::= { tlPAEmailContactEntry 1 }

tlPAEmailContactRowStatus OBJECT-TYPE
  SYNTAX RowStatus
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The row status for the tlPAEmailContactTable row"
  ::= { tlPAEmailContactEntry 2 }
  
tlPAEmailContactName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The name of the email contact."
  ::= { tlPAEmailContactEntry 3 }

tlPAEmailContactAddress OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The address of the email contact."
  ::= { tlPAEmailContactEntry 4 }

tlPASnmpContacts OBJECT IDENTIFIER   ::= { tlPAContacts 2 }

tlPANumberOfSnmpContacts OBJECT-TYPE
  SYNTAX NonNegativeInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The number SNMP contacts currently defined."
  ::= { tlPASnmpContacts 1 }

tlPASnmpContactsTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlPASnmpContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A list SNMP contact entries. The number of entries is
    given by the value of tlPANumberOfSnmpContacts."
  ::= { tlPASnmpContacts 2 }
  
tlPASnmpContactEntry OBJECT-TYPE
  SYNTAX TlPASnmpContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing SNMP contacts information."
  INDEX { tlPASnmpContactIndex }
  ::= { tlPASnmpContactsTable 1 }

TlPASnmpContactEntry ::= SEQUENCE {
  tlPASnmpContactIndex			PositiveInteger,
  tlPASnmpContactRowStatus		RowStatus,
  tlPASnmpContactName			DisplayString,
  tlPASnmpContactIpAddress		DisplayString,
  tlPASnmpContactPort			PositiveInteger,
  tlPASnmpContactSnmpVersion	INTEGER,
  tlPASnmpContactSecurityName	DisplayString,
  tlPASnmpContactPrivPassword	DisplayString,
  tlPASnmpContactAuthPassword	DisplayString
   }

tlPASnmpContactIndex OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "This is the index number of this SNMP contact."
  ::= { tlPASnmpContactEntry 1 }

tlPASnmpContactRowStatus OBJECT-TYPE
  SYNTAX RowStatus
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The row status for the tlPASnmpContactTable row"
  ::= { tlPASnmpContactEntry 2 }
  
tlPASnmpContactName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The name of the SNMP contact."
  ::= { tlPASnmpContactEntry 3 }

tlPASnmpContactIpAddress OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The IP address of the SNMP contact."
  ::= { tlPASnmpContactEntry 4 }
  
tlPASnmpContactPort OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The port of the SNMP contact."
  ::= { tlPASnmpContactEntry 5 }
  
tlPASnmpContactSnmpVersion OBJECT-TYPE
  SYNTAX INTEGER {
      snmpv1(1),
      snmpv2c(2),
      snmpv3(3) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The SNMP contact version to use for sending traps."
  ::= { tlPASnmpContactEntry 6 }
  
tlPASnmpContactSecurityName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The SNMP contact security name."
  ::= { tlPASnmpContactEntry 7 }
    
tlPASnmpContactPrivPassword OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The SNMP contact priv password to use for sending V3 traps."
  ::= { tlPASnmpContactEntry 8 }
  
tlPASnmpContactAuthPassword OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The SNMP contact auth password to use for sending V3 traps."
  ::= { tlPASnmpContactEntry 9 }

--------------------------------------------------------------------------
-- UPS Device
--------------------------------------------------------------------------

tlUPS OBJECT IDENTIFIER   ::= { tripplite 100 }

tlUpsObjects OBJECT IDENTIFIER  ::= { tlUPS 1 }

tlUpsIdent OBJECT IDENTIFIER  ::= { tlUpsObjects 1 }

tlUpsIdentUpsSoftwareChecksum OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A checksum for the UPS software."
  ::= { tlUpsIdent 1 }

tlUpsIdentSerialNum OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Serial number for the UPS."
  ::= { tlUpsIdent 2 }

tlUpsIdentID OBJECT-TYPE
  SYNTAX Integer32 (0..65535)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "A user-supplied ID for the UPS."
  ::= { tlUpsIdent 3 }

tlUpsSnmpCardSerialNum OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Serial number for the UPS."
  ::= { tlUpsIdent 4 }

tlUpsSelectedDeviceID OBJECT-TYPE
  SYNTAX Integer32 (0..65535)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The device ID selected to be used for retrieving data for this mib. 
    As the snmp web card has only one device, this is read only for it"
  ::= { tlUpsIdent 5 }

tlUpsLocation OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The device location string."
  ::= { tlUpsIdent 6 }

tlUpsBattery OBJECT IDENTIFIER  ::= { tlUpsObjects 2 }

tlUpsBatteryAge OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The age of the battery in years.  This is equal to
    the current date minus tlConfigBattReplDate."
  ::= { tlUpsBattery 1 }


tlUpsTemperatureF OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The temperature of the battery, in Farenheight degrees.  This is
    calculated from upsBatteryTemperature, which is in Celsius degrees."
  ::= { tlUpsBattery 2 }

tlUpsExternalBatteryAge OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The age of external battery in years.  This is equal to
    the current date minus tlConfigExternalBattReplDate."
  ::= { tlUpsBattery 3 }

tlUpsInput OBJECT IDENTIFIER  ::= { tlUpsObjects 3 }

tlUpsInputNumVoltages OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The number of input voltages. Phase to phase 
    or phase to neutral.  This variable indicates the 
    number of rows in the input table."
  ::= { tlUpsInput 1 }

tlUpsInputVoltageTable OBJECT-TYPE
  SYNTAX     SEQUENCE OF TlUpsInputVoltageEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "A list of voltage input table entries.  The number of entries
    is given by the value of tlUpsInputNumVoltages."
  ::= { tlUpsInput 2 }

tlUpsInputVoltageEntry OBJECT-TYPE
  SYNTAX     TlUpsInputVoltageEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "An entry containing information applicable to a
    particular input voltage."
  INDEX { tlUpsInputVoltageIndex }
  ::= { tlUpsInputVoltageTable 1 }

TlUpsInputVoltageEntry ::= SEQUENCE {
  tlUpsInputVoltageIndex   PositiveInteger,
  tlUpsInputVoltageType	   NonNegativeInteger,
  tlUpsInputVoltage        NonNegativeInteger
}

tlUpsInputVoltageIndex OBJECT-TYPE
  SYNTAX     PositiveInteger
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "The input voltage identifier."
  ::= { tlUpsInputVoltageEntry 1 }

tlUpsInputVoltageType OBJECT-TYPE
  SYNTAX INTEGER {
      phaseToNeutral(0),
      phaseToPhase(1) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Whether voltage measured is phase to 
    phase or phase to neutral."
  ::= { tlUpsInputVoltageEntry 2 }

tlUpsInputVoltage OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  UNITS      "RMS Volts"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The magnitude of the present input voltage.
    A value of 6553 indicates Unknown."
  ::= { tlUpsInputVoltageEntry 3 }

tlUpsInputSourceSelect OBJECT-TYPE
  SYNTAX INTEGER {
      inputSourceA(0),
      inputSourceB(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The determination as to which of two AC input
	lines is designated as the primary input source.
	The other is designated as the secondary input
	source. This value will always return inputSourceA(0)
	for devices with a single input source. Setting
	this value is supported only on selected models."
  ::= { tlUpsInput 3 }

tlUpsPhaseImbalance OBJECT-TYPE
  SYNTAX INTEGER
  UNITS "Percent"
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Percentage of imbalance of the 3 phases."
  ::= { tlUpsInput 4 }

tlUpsInputSourceAvailability OBJECT-TYPE
  SYNTAX INTEGER {
    none(0),
    inputSourceA(1),
    inputSourceB(2),
    inputSourceAB(3) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The determination as to which of two AC input lines
    are available. The agent will return either inputSourceA(1)
    or inputSourceB(2) if only one line is available, or
    inputSourceAB(3) if both lines are available. The agent
    will never return none(0) since the device will be powered
    off if neither line is available."
  ::= { tlUpsInput 5 }

tlUpsInputSourceInUse OBJECT-TYPE
  SYNTAX INTEGER {
    inputSourceA(0),
    inputSourceB(1) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The determination as to which one of two AC input lines is
    in use."
  ::= { tlUpsInput 6 }

tlUpsInputSourceTransitionCount OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The number of times the device transitions between primary and
    secondary sources. Most devices are limied to 65533 transitions,
    after which the value will not increment."
  ::= { tlUpsInput 7 }

tlUpsOutput OBJECT IDENTIFIER   ::= { tlUpsObjects 4 }

tlUpsOutputPowerTotal OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The power capacity of the device."
  ::= { tlUpsOutput 5 }

tlUpsOutputCircuits OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The number of output circuits.  This variable 
    indicates the number of rows in the output circuit table."
  ::= { tlUpsOutput 6 }

tlUpsOutputCircuitTable OBJECT-TYPE
  SYNTAX     SEQUENCE OF TlUpsOutputCircuitEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "A list of output currents table entries.  The number of entries
     is given by the value of tlUpsOutputNumCircuits."
  ::= { tlUpsOutput 7 }

tlUpsOutputCircuitEntry OBJECT-TYPE
  SYNTAX     TlUpsOutputCircuitEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "An entry containing information applicable to a
    particular output circuit."
  INDEX { tlUpsOutputCircuitIndex }
  ::= { tlUpsOutputCircuitTable 1 }

TlUpsOutputCircuitEntry ::= SEQUENCE {
  tlUpsOutputCircuitIndex       PositiveInteger,
  tlUpsOutputCircuitStatus      INTEGER,
  tlUpsOutputCircuitLoadCurrent NonNegativeInteger,
  tlUpsOutputCircuitVoltage     NonNegativeInteger,
  tlUpsOutputCircuitPower       NonNegativeInteger,
  tlUpsOutputCircuitPowerFactor NonNegativeInteger
}

tlUpsOutputCircuitIndex OBJECT-TYPE
  SYNTAX     PositiveInteger
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
    "The output circuit identifier."
  ::= { tlUpsOutputCircuitEntry 1 }

tlUpsOutputCircuitStatus OBJECT-TYPE
  SYNTAX INTEGER {
      open(0),
      closed(1) }
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "Whether the breaker is open or closed."
  ::= { tlUpsOutputCircuitEntry 2 }

tlUpsOutputCircuitLoadCurrent OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  UNITS      "0.1 Amperes"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The magnitude of the present output current in
    tenths of an amp. A value of 65534 indicates Unknown."
  ::= { tlUpsOutputCircuitEntry 3 }

tlUpsOutputCircuitVoltage OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  UNITS      "0.1 Volts"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The magnitude of the present circuit voltage in
    tenths of an volt."
  ::= { tlUpsOutputCircuitEntry 4 }

tlUpsOutputCircuitPower OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  UNITS      "Watts"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The magnitude of the present power in watts.
    tenths of an amp."
  ::= { tlUpsOutputCircuitEntry 5 }

tlUpsOutputCircuitPowerFactor OBJECT-TYPE
  SYNTAX     NonNegativeInteger
  UNITS      "Percent"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
    "The power factor of all receptacles in a given circuit as
    a %."
  ::= { tlUpsOutputCircuitEntry 6 }

tlUpsAggregatePowerFactor OBJECT-TYPE
  SYNTAX PositiveInteger
  UNITS "0.1 Watts"
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The aggregrate power factor of all phases."
  ::= { tlUpsOutput 8 }

-- tlUpsBypass [unused] OBJECT IDENTIFIER   ::= { tlUpsObjects 5 }

tlUpsAlarm OBJECT IDENTIFIER  ::= { tlUpsObjects 6 }

tlUpsAlarmsPresent OBJECT-TYPE
  SYNTAX Gauge32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The present number of active alarm conditions."
  ::= { tlUpsAlarm 1 }
  
tlUpsAlarmTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlUpsAlarmEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A list of alarm table entries."
  ::= { tlUpsAlarm 2 }
  
tlUpsAlarmEntry OBJECT-TYPE
  SYNTAX TlUpsAlarmEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing information applicable to a particular alarm."
  INDEX { tlUpsAlarmId }
  ::= { tlUpsAlarmTable 1 }
    
TlUpsAlarmEntry ::= SEQUENCE {
  tlUpsAlarmId         PositiveInteger,
  tlUpsAlarmDescr      AutonomousType,
  tlUpsAlarmTime       TimeStamp,
  tlUpsAlarmDetail     DisplayString,
  tlUpsAlarmDeviceId   PositiveInteger,
  tlUpsAlarmDeviceName DisplayString,
  tlUpsAlarmLocation   DisplayString,
  tlUpsAlarmGroup      INTEGER,
  tlUpsAlarmIp         IpAddress,
  tlUpsAlarmMac        DisplayString
}

tlUpsAlarmId OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A unique identifier for an alarm condition."
  ::= { tlUpsAlarmEntry 1 }
  
tlUpsAlarmDescr OBJECT-TYPE
  SYNTAX AutonomousType
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A description of the alarm condition."
  ::= { tlUpsAlarmEntry 2 }
  
tlUpsAlarmTime OBJECT-TYPE
  SYNTAX TimeStamp
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The value of sysUpTime when the alarm condition was detected."
  ::= { tlUpsAlarmEntry 3 }
  
tlUpsAlarmDetail OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A textual description of the alarm condition."
  ::= { tlUpsAlarmEntry 4 }
  
tlUpsAlarmDeviceId OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A numeric identifier for the device on which the alarm is active."
  ::= { tlUpsAlarmEntry 5 }
  
tlUpsAlarmDeviceName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "A string identifier for the device on which the alarm is active."
  ::= { tlUpsAlarmEntry 6 }
  
tlUpsAlarmLocation OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The location of the device on which the alarm is active."
  ::= { tlUpsAlarmEntry 7 }
  
tlUpsAlarmGroup OBJECT-TYPE
  SYNTAX INTEGER {
      critical(1),
      warning(2),
      info(3),
      status(4),
      offline(5),
      custom(6) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The category/group of this alarm."
  ::= { tlUpsAlarmEntry 8 }

tlUpsAlarmIp OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The originating IP address associated with this alarm."
  ::= { tlUpsAlarmEntry 9 }

tlUpsAlarmMac OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The originating mac address associated with this alarm."
  ::= { tlUpsAlarmEntry 10 }

tlUpsWellKnownAlarms OBJECT IDENTIFIER  ::= { tlUpsAlarm 3 }

tlUpsAlarmPrimaryPowerOutage OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The primary power source is not present."
    ::= { tlUpsWellKnownAlarms 1 }

tlUpsAlarmSecondaryPowerOutage OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The secondary power source is not present."
    ::= { tlUpsWellKnownAlarms 2 }
    
tlUpsAlarmLoadLevelAboveThreshold OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The load level is above the designated threshold."
  ::= { tlUpsWellKnownAlarms 3 }

tlUpsAlarmOutputCurrentChanged OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The output current changed from its last known value."
  ::= { tlUpsWellKnownAlarms 4 }

tlUpsAlarmBatteryAgeAboveThreshold OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "One or more batteries have been determined to require
    replacement."
  ::= { tlUpsWellKnownAlarms 5 }

tlUpsAlarmLoadOff OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The load is off."
  ::= { tlUpsWellKnownAlarms 6 }

tlUpsAlarmUserDefined OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "A user-defined event is in alarm."
  ::= { tlUpsWellKnownAlarms 7 }

tlUpsAlarmBatteryBad OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "One or more batteries have been determined to require
    replacement."
  ::= { tlUpsWellKnownAlarms  8 }

tlUpsAlarmOnBattery OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS is drawing power from the batteries."
  ::= { tlUpsWellKnownAlarms  9 }

tlUpsAlarmLowBattery OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The remaining battery run-time is less than or equal
    to upsConfigLowBattTime."
  ::= { tlUpsWellKnownAlarms  10 }

tlUpsAlarmDepletedBattery OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS will be unable to sustain the present load
    when and if the utility power is lost."
  ::= { tlUpsWellKnownAlarms  11 }

tlUpsAlarmTempBad OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "A temperature is out of tolerance."
  ::= { tlUpsWellKnownAlarms  12 }

tlUpsAlarmInputBad OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "An input condition is out of tolerance."
  ::= { tlUpsWellKnownAlarms  13 }

tlUpsAlarmOutputBad OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "An output condition (other than OutputOverload) is
    out of tolerance."
  ::= { tlUpsWellKnownAlarms  14 }

tlUpsAlarmOutputOverload OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The output load exceeds the UPS output capacity."
  ::= { tlUpsWellKnownAlarms  15 }

tlUpsAlarmOnBypass OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The Bypass is presently engaged on the UPS."
  ::= { tlUpsWellKnownAlarms  16 }

tlUpsAlarmBypassBad OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The Bypass is out of tolerance."
  ::= { tlUpsWellKnownAlarms 17 }

tlUpsAlarmOutputOffAsRequested OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS has shutdown as requested, i.e., the output
    is off."
  ::= { tlUpsWellKnownAlarms 18 }

tlUpsAlarmUpsOffAsRequested OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The entire UPS has shutdown as commanded."
  ::= { tlUpsWellKnownAlarms 19 }

tlUpsAlarmChargerFailed OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "An uncorrected problem has been detected within the
    UPS charger subsystem."
  ::= { tlUpsWellKnownAlarms 20 }

tlUpsAlarmUpsOutputOff OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The output of the UPS is in the off state."
  ::= { tlUpsWellKnownAlarms 21 }

tlUpsAlarmUpsSystemOff OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS system is in the off state."
  ::= { tlUpsWellKnownAlarms 22 }

tlUpsAlarmFanFailure OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The failure of one or more fans in the UPS has been
    detected."
  ::= { tlUpsWellKnownAlarms 23 }

tlUpsAlarmFuseFailure OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The failure of one or more fuses has been detected."
  ::= { tlUpsWellKnownAlarms 24 }

tlUpsAlarmGeneralFault OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "A general fault in the UPS has been detected."
  ::= { tlUpsWellKnownAlarms 25 }

tlUpsAlarmDiagnosticTestFailed OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The result of the last diagnostic test indicates a
    failure."
  ::= { tlUpsWellKnownAlarms 26 }

tlUpsAlarmCommunicationsLost OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "A problem has been encountered in the communications
    between the agent and the UPS."
  ::= { tlUpsWellKnownAlarms 27 }

tlUpsAlarmAwaitingPower OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS output is off and the UPS is awaiting the
    return of input power."
  ::= { tlUpsWellKnownAlarms 28 }

tlUpsAlarmShutdownPending OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "A upsShutdownAfterDelay countdown is underway."
  ::= { tlUpsWellKnownAlarms 29 }

tlUpsAlarmShutdownImminent OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The UPS will turn off power to the load in less than
    5 seconds; this may be either a timed shutdown or a
    low battery shutdown."
  ::= { tlUpsWellKnownAlarms 30 }

tlUpsAlarmTestInProgress OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "A test is in progress, as initiated and indicated by
    the Test Group.  Tests initiated via other
    implementation-specific mechanisms can indicate the
    presence of the testing in the alarm table, if
    desired, via a OBJECT-IDENTITY macro in the MIB
    document specific to that implementation and are
    outside the scope of this OBJECT-IDENTITY."
  ::= { tlUpsWellKnownAlarms 31 }

tlUpsAlarmCircuitBreaker1Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #1 is open."
  ::= { tlUpsWellKnownAlarms 32 }

tlUpsAlarmCircuitBreaker2Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #2 is open."
  ::= { tlUpsWellKnownAlarms 33 }

tlUpsAlarmCircuitBreaker3Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #3 is open."
  ::= { tlUpsWellKnownAlarms 34 }

tlUpsAlarmCircuitBreaker4Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #4 is open."
  ::= { tlUpsWellKnownAlarms 35 }

tlUpsAlarmCircuitBreaker5Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #5 is open."
  ::= { tlUpsWellKnownAlarms 36 }

tlUpsAlarmCircuitBreaker6Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #6 is open."
  ::= { tlUpsWellKnownAlarms 37 }

tlUpsAlarmCircuitBreaker7Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #7 is open."
  ::= { tlUpsWellKnownAlarms 38 }

tlUpsAlarmCircuitBreaker8Open OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "Circuit breakers #8 is open."
  ::= { tlUpsWellKnownAlarms 39 }

tlUpsAlarmCurrent1AboveThreshold OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The output current on line 1 exceeds load limits."
  ::= { tlUpsWellKnownAlarms  40 }

tlUpsAlarmCurrent2AboveThreshold OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The output current on line 2 exceeds load limits."
  ::= { tlUpsWellKnownAlarms  41 }

tlUpsAlarmCurrent3AboveThreshold OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The output current on line 3 exceeds load limits."
  ::= { tlUpsWellKnownAlarms  42 }

tlUpsAlarmRuntimeBelowWarningLevel OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The battery seconds remaining is below warning level."
  ::= { tlUpsWellKnownAlarms  43 }

tlUpsAlarmBusStartVoltageLow OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter start up bus voltage is too low."
  ::= { tlUpsWellKnownAlarms  44 }

tlUpsAlarmBusOverVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter bus voltage is too high."
  ::= { tlUpsWellKnownAlarms  45 }

tlUpsAlarmBusUnderVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter bus voltage is too low."
  ::= { tlUpsWellKnownAlarms  46 }

tlUpsAlarmBusVoltageUnbalanced OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter bus voltage is not balanced."
  ::= { tlUpsWellKnownAlarms  47 }

tlUpsAlarmInverterSoftStartBad OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter bus voltage cannot reach desired voltage within a
    specified duration."
  ::= { tlUpsWellKnownAlarms  48 }

tlUpsAlarmInverterOverVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter voltage is too high."
  ::= { tlUpsWellKnownAlarms  49 }

tlUpsAlarmInverterUnderVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter voltage is too low."
  ::= { tlUpsWellKnownAlarms  50 }

tlUpsAlarmInverterCircuitBad OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The inverter output is shorted."
  ::= { tlUpsWellKnownAlarms  51 }

tlUpsAlarmBatteryOverVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The battery voltage is too high."
  ::= { tlUpsWellKnownAlarms  52 }

tlUpsAlarmBatteryUnderVoltage OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The battery voltage is too low."
  ::= { tlUpsWellKnownAlarms  53 }

tlUpsAlarmSiteWiringFault OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The utility input wiring is faulty."
  ::= { tlUpsWellKnownAlarms  54 }

tlUpsAlarmOverTemperatureProtection OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The over temperature protection is activated."
  ::= { tlUpsWellKnownAlarms  55 }

tlUpsAlarmOverCharged OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The UPS is over charged."
  ::= { tlUpsWellKnownAlarms  56 }

tlUpsAlarmEPOActive OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The EPO is currently activate."
  ::= { tlUpsWellKnownAlarms  57 }

tlUpsAlarmBypassFrequencyBad OBJECT-IDENTITY
  STATUS current
  DESCRIPTION
    "The bypass frequency is out of tolerance."
  ::= { tlUpsWellKnownAlarms  58 }

tlUpsAlarmExternalSmartBatteryAgeAboveThreshold OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "One or more external smart batteries have been determined to require
    replacement."
  ::= { tlUpsWellKnownAlarms 59 }

tlUpsAlarmExternalNonSmartBatteryAgeAboveThreshold OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "One or more external non-smart batteries have been determined to require
    replacement."
  ::= { tlUpsWellKnownAlarms 60 }

tlUpsAlarmSmartBatteryCommLost OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "Communications with the smart batteries was lost."
  ::= { tlUpsWellKnownAlarms 61 }

tlUpsAlarmSourceAOutage OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Input power source A is not present."
    ::= { tlUpsWellKnownAlarms 62 }

tlUpsAlarmSourceBOutage OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Input power source B is not present."
    ::= { tlUpsWellKnownAlarms 63 }

tlUpsAlarmWatchdogReset OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The internal watchdog triggered a reset of the device."
    ::= { tlUpsWellKnownAlarms 64 }

tlUpsAlarmDevName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS deprecated
  DESCRIPTION
    "The name of the device, tlDevName, corresponding to the device that is
    associated with this alarm."
  ::= { tlUpsAlarm 7 }

tlUpsAlarmDevLocation OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS deprecated
  DESCRIPTION
    "The location of the device, tlDevLocation, corresponding to the device
    that is associated with this alarm."
  ::= { tlUpsAlarm 8 }

tlUpsAlarmCategory OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS deprecated
  DESCRIPTION
    "The category, tlDevEvtCategory, of this alarm."
  ::= { tlUpsAlarm 9 }

tlUpsTest OBJECT IDENTIFIER   ::= { tlUpsObjects 7 }

tlUpsTestDate OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The date of the last self-test run on the ups, in the
    format YYYYMMDD."
  ::= { tlUpsTest 1 }

tlUpsTestResultsDetail OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Result of the last self-test run on the ups."
  ::= { tlUpsTest 2 }

tlUpsControl OBJECT IDENTIFIER  ::= { tlUpsObjects 8 }

tlUpsWatchdogSupported OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Indicates whether or not this UPS supports a watchdog reboot."
  ::= { tlUpsControl 1 }


tlUpsWatchdogSecsBeforeReboot OBJECT-TYPE
  SYNTAX NonNegativeInteger
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The maximum number of seconds that can expire between polls that
    the engine makes to the UPS for data.  If this time runs out, then
    the UPS will cycle its outputs.  Set this to zero to turns disable
    this feature."
  ::= { tlUpsControl 2 }

tlUpsWellKnownControls OBJECT IDENTIFIER  ::= { tlUpsControl 3 }

tlUpsControlSelfTest OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set to TRUE to initiate Self Test"
  ::= { tlUpsWellKnownControls 1 }
  
tlUpsControlRamp OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set to TRUE to initiate Ramp"
  ::= { tlUpsWellKnownControls 2 }
  
tlUpsControlShed OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set to TRUE to initiate Shed"
  ::= { tlUpsWellKnownControls 3 }
  
tlUpsControlUpsOn OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set to TRUE to turn UPS on"
  ::= { tlUpsWellKnownControls 4 }

tlUpsControlUpsOff OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set to TRUE to turn UPS off"
  ::= { tlUpsWellKnownControls 5 }
  
tlUpsConfig OBJECT IDENTIFIER   ::= { tlUpsObjects 9 }

tlUpsConfigBattReplDate OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The date on which the battery was last replaced, in the format
    YYYYMMDD."
  ::= { tlUpsConfig 1 }

-- Deprecated, interface no longer supported.
--
-- tlUpsConfigTftpGetAddr OBJECT-TYPE
--  SYNTAX IpAddress
--  MAX-ACCESS read-write
--  STATUS current
--  DESCRIPTION
--    "The IP address of the TFTP server you wish to acquire a config ini file from, non persistent, 0.0.0.0 when empty"
--  ::= { tlUpsConfig 2 }
--
-- tlUpsConfigTftpGetAcction OBJECT-TYPE
--  SYNTAX INTEGER {
--      get(1),
--      getting(2),
--      idle(3) }
--  MAX-ACCESS read-write
--  STATUS current
--  DESCRIPTION
--    "setting this entry to get(1) will start a down load from the specified address, during the download this entry
--    will read getting(2), when finished, the card will reboot to the new ini supplied parms. At all other times this 
--    entry will read idle(3)"
--  ::= { tlUpsConfig 3 }

tlUpsConfigDisplayUnits OBJECT-TYPE
  SYNTAX INTEGER {
      english(0),
      metric(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Selects English or Metric display for all readings. This selection may not
    be available on all devices. Further, some devices may support this selection,
    but not via a software selector. In this latter case, selections must be
    performed on the device itself."
  ::= { tlUpsConfig 4 }

tlUpsConfigExternalBattReplDate OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The date on which the external battery was last replaced, in the format
    YYYYMMDD."
  ::= { tlUpsConfig 5 }
  
tlUpsOutlet OBJECT IDENTIFIER   ::= { tlUpsObjects 10 }

tlUpsOutletNumOutlets OBJECT-TYPE
  SYNTAX NonNegativeInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The number of available Outlets in this device."
  ::= { tlUpsOutlet 1 }

tlUpsOutletTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlUpsOutletEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A list of all device Outlets for all devices."
  ::= { tlUpsOutlet 2 }

tlUpsOutletEntry OBJECT-TYPE
  SYNTAX TlUpsOutletEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing Outlet information applicable to a particular
    device managed by this agent."
  INDEX {
    tlUpsOutletIndex }
  ::= { tlUpsOutletTable 1 }

TlUpsOutletEntry ::= SEQUENCE {
  tlUpsOutletIndex        PositiveInteger,
  tlUpsOutletState        INTEGER,
  tlUpsOutletType         Integer32,
  tlUpsOutletControl      INTEGER,
  tlUpsOutletName         DisplayString,
  tlUpsOutletRampAction   INTEGER,
  tlUpsOutletRampDataType INTEGER,
  tlUpsOutletRampData     Integer32,
  tlUpsOutletShedAction   INTEGER,
  tlUpsOutletShedDataType INTEGER,
  tlUpsOutletShedData     Integer32,
  tlUpsOutletGroupNdx     Integer32,
  tlUpsOutletCurrent      PositiveInteger,
  tlUpsOutletPower        PositiveInteger }

tlUpsOutletIndex OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "This is the index number of this Outlet for the device
    indicated by tlDeviceIndex."
  ::= { tlUpsOutletEntry 1 }

tlUpsOutletState OBJECT-TYPE
  SYNTAX INTEGER {
      unknown(0),
      off(1),
      on(2) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current state of the Outlet."
  ::= { tlUpsOutletEntry 2 }

tlUpsOutletType OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "This is a bit field that indicates the type of this Outlet.
    When 0, the outlet is not controllable and has none of the
    other features indicated in the bit map.  When non-zero,
    the features present for this outlet can be interpreted with the 
    definition.

    Bit   Display
     0    Reserved, may be 1 or 0
     1    Controllable
     2
     3
     4
     5
     6
     7
     8
     9
    10
    11
    12
    13
    14
    15
    "
  ::= { tlUpsOutletEntry 3 }

tlUpsOutletControl OBJECT-TYPE
  SYNTAX INTEGER {
      turnOff(1),
      turnOn(2),
      cycle(3) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Controls the state of the Outlet."
  ::= { tlUpsOutletEntry 4 }

tlUpsOutletName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "A string identifying the devices attached to the
    output(s) of the device."
  ::= { tlUpsOutletEntry 5 }


tlUpsOutletRampAction OBJECT-TYPE
  SYNTAX INTEGER {
      remainOff(0),
      turnOnAfterDelay(1)
   }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The ramp action to take on the Outlet."
  ::= { tlUpsOutletEntry 6 }

tlUpsOutletRampDataType OBJECT-TYPE
  SYNTAX INTEGER {
      delayInSeconds(0)
   }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The type of data associated with ramp action."
  ::= { tlUpsOutletEntry 7 }

tlUpsOutletRampData OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The data value associated with type of ramp data."
  ::= { tlUpsOutletEntry 8 }

tlUpsOutletShedAction OBJECT-TYPE
  SYNTAX INTEGER {
      remainOn(0),
      turnOffAfterDelay(1)
   }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The shed action to take on the Outlet."
  ::= { tlUpsOutletEntry 9 }

tlUpsOutletShedDataType OBJECT-TYPE
  SYNTAX INTEGER {
      delayInSeconds(0)
   }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The type of data associated with shed action."
  ::= { tlUpsOutletEntry 10 }

tlUpsOutletShedData OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The data value associated with type of shed data."
  ::= { tlUpsOutletEntry 11 }

tlUpsOutletGroupNdx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "tlUpsOutletGroupIndex of corresponding outlet group, or 0 if ungrouped."
  ::= { tlUpsOutletEntry 12 }

tlUpsOutletCurrent OBJECT-TYPE
  SYNTAX PositiveInteger
  UNITS      "0.1 RMS Amp"
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The value of this outlet's current, represented as 0.1A."
  ::= { tlUpsOutletEntry 13 }

tlUpsOutletPower OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The value of this outlet's power in watts."
  ::= { tlUpsOutletEntry 14 }


tlUpsOutletGroup OBJECT IDENTIFIER   ::= { tlUpsObjects 11 }

tlUpsOutletNumOutletGroups OBJECT-TYPE
  SYNTAX NonNegativeInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The number of available Outlet Groups in this device."
  ::= { tlUpsOutletGroup 1 }

tlUpsOutletGroupTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlUpsOutletGroupEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A list of device outlet group entries. The number of entries is
    given by the value of tlUpsOutletNumOutletGroups."
  ::= { tlUpsOutletGroup 2 }
  
tlUpsOutletGroupEntry OBJECT-TYPE
  SYNTAX TlUpsOutletGroupEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing outlet group information applicable
     to a particular device managed by this agent"
  INDEX { tlUpsOutletGroupIndex }
  ::= { tlUpsOutletGroupTable 1 }

TlUpsOutletGroupEntry ::= SEQUENCE {
  tlUpsOutletGroupIndex     PositiveInteger,
  tlUpsOutletGroupRowStatus	RowStatus,
  tlUpsOutletGroupName      DisplayString,
  tlUpsOutletGroupDesc      DisplayString,
  tlUpsOutletGroupState     INTEGER,
  tlUpsOutletGroupControl   INTEGER }

tlUpsOutletGroupIndex OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "This is the index number of this load group for the device."
  ::= { tlUpsOutletGroupEntry 1 }

tlUpsOutletGroupRowStatus OBJECT-TYPE
  SYNTAX RowStatus
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Row status for the tlUpsOutletGroupTable"
  ::= { tlUpsOutletGroupEntry 2 }

tlUpsOutletGroupName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The name of this outlet group."
  ::= { tlUpsOutletGroupEntry 3 }

tlUpsOutletGroupDesc OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "A description for this outlet group."
  ::= { tlUpsOutletGroupEntry 4 }

tlUpsOutletGroupState OBJECT-TYPE
  SYNTAX INTEGER {
      unknown(0),
      off(1),
      on(2),
      mixed(3) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current state of the outlet group."
  ::= { tlUpsOutletGroupEntry 5 }

tlUpsOutletGroupControl OBJECT-TYPE
  SYNTAX INTEGER {
      turnOff(1),
      turnOn(2),
      cycle(3) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Controls the state of every outlet associated with the group."
  ::= { tlUpsOutletGroupEntry 6 }
  
tlUpsMainOutlet OBJECT IDENTIFIER   ::= { tlUpsObjects 12 }

tlUpsMainOutletState OBJECT-TYPE
  SYNTAX INTEGER {
      unknown(0),
      off(1),
      on(2),
      mixed(3) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current state of the main output of the device."
  ::= { tlUpsMainOutlet 1 }


tlUpsMainOutletControllable OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Indicates if this device has controllable outlets"
  ::= { tlUpsMainOutlet 2 }

tlUpsMainOutletControl OBJECT-TYPE
  SYNTAX INTEGER {
      idle(0),
      turnOff(1),
      turnOn(2),
      cycle(3) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Controls the state of the main outlet of the device."
  ::= { tlUpsMainOutlet 3 }

tlUpsEnvironment OBJECT IDENTIFIER   ::= { tlUpsObjects 13 }

tlUpsTemperature OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The ambient temperature. The measurement returned will either be in
    units of Celsius (C) or Fahrenheit (F) depending upon whether Metric
    or English was selected for the reading by tlUpsConfigDisplayUnits."
  ::= { tlUpsEnvironment 1 }

  
---------------------------------------------------------------
-- UPS traps
---------------------------------------------------------------

tlUpsTraps              OBJECT IDENTIFIER ::= { tlUPS 2 }

tlUpsTrapAlarmEntryAddedV1 TRAP-TYPE
    ENTERPRISE tlUpsTraps
    VARIABLES { tlUpsAlarmId, tlUpsAlarmDescr, tlUpsAlarmDetail, tlUpsAlarmDeviceId,
                tlUpsAlarmDeviceName, tlUpsAlarmLocation, tlUpsAlarmGroup }
    DESCRIPTION
            "This trap is sent each time an alarm is inserted into
            to the alarm table."
    --#SUMMARY "UPS Alarm: %s - %s."
    --#ARGUMENTS {6, 2}
    --#SEVERITY WARNING
 ::= 3

tlUpsTrapAlarmEntryAdded NOTIFICATION-TYPE
    OBJECTS { tlUpsAlarmId, tlUpsAlarmDescr, tlUpsAlarmDetail, tlUpsAlarmDeviceId,
              tlUpsAlarmDeviceName, tlUpsAlarmLocation, tlUpsAlarmGroup }
    STATUS  current
    DESCRIPTION
            "This trap is sent each time an alarm is inserted into
            to the alarm table."
    --#SUMMARY "UPS Alarm: %s - %s."
    --#ARGUMENTS {6, 2}
    --#SEVERITY WARNING
    ::= { tlUpsTraps 3 }

tlUpsTrapAlarmEntryRemovedV1 TRAP-TYPE
    ENTERPRISE tlUpsTraps
    VARIABLES { tlUpsAlarmId, tlUpsAlarmDescr, tlUpsAlarmDetail, tlUpsAlarmDeviceId,
                tlUpsAlarmDeviceName, tlUpsAlarmLocation, tlUpsAlarmGroup }
    DESCRIPTION
            "This trap is sent each time an alarm is removed from
            the alarm table."
    --#SUMMARY "UPS Alarm: %s - %s."
    --#ARGUMENTS {6, 2}
    --#SEVERITY WARNING
 ::= 4

tlUpsTrapAlarmEntryRemoved NOTIFICATION-TYPE
    OBJECTS { tlUpsAlarmId, tlUpsAlarmDescr, tlUpsAlarmDetail, tlUpsAlarmDeviceId,
              tlUpsAlarmDeviceName, tlUpsAlarmLocation, tlUpsAlarmGroup }
    STATUS  current
    DESCRIPTION
            "This trap is sent each time an alarm is removed from
            the alarm table."
    --#SUMMARY "UPS Alarm: %s - %s."
    --#ARGUMENTS {6, 2}
    --#SEVERITY WARNING
    ::= { tlUpsTraps 4 }

--------------------------------------------------------------------------
--------------------------------------------------------------------------
-- begin new traps
--------------------------------------------------------------------------
--------------------------------------------------------------------------

tlUpsTrapSystemStartup NOTIFICATION-TYPE
  STATUS current
  DESCRIPTION
    "Used to inform another entity of an engine's startup. The varbinds that follow are:

    OBJ1      = tlEngineType
    Obj1Value = The type of engine providing this data
    OBJ2      = tlEngineSoftwareVersion
    Obj2Value = The current version of the engine
    OBJ3      = tlEngineMACAddr
    Obj3Value = The MAC address of the engine
    OBJ4      = tlUpsSnmpCardSerialNum
    Obj4Value = The serial number of the SNMPWEBCARD [should be 0 on PC]
    
    --- if this trap is extended, place all static OIDs above this mark. all objects below
    --- the number of devices (tlNumDevices) is explicit as per device for enumeration by
    --- the target receiver
    
    OBJ5      = tlNumDevices
    Obj5Value = The number of devices attached

    --- The following objects will be replicated per each device:

    OBJ6      = The OID for an entry of tlDevManufacturer, indexed by device
    Obj6Value = The device's manufacturer
    OBJ7      = The OID for an entry of tlDevModel, indexed by device
    Obj7Value = The device's model name
    OBJ8      = The OID for an entry of tlDevName, indexed by device
    Obj8Value = The device's display name
    OBJ9      = The OID for an entry of tlDevLocation, indexed by device
    Obj9Value = The device's location
    OBJ10     = The OID for an entry of tlDevRegion, indexed by device
    Obj10Value= The device's region
    OBJ11     = The OID for an entry of tlDevProtocol, indexed by device
    Obj11Value= The device's protocol (display string format)
    "
  ::= { tlUpsTraps 5 }

tlUpsTrapSystemShutdown NOTIFICATION-TYPE
  STATUS current
  DESCRIPTION
    "Used to inform another entity of an engine's startup. The varbinds that follow are:

    OBJ1      = tlEngineType
    Obj1Value = The type of engine providing this data
    OBJ2      = tlEngineSoftwareVersion
    Obj2Value = The current version of the engine
    OBJ3      = tlEngineMACAddr
    Obj3Value = The MAC address of the engine
    OBJ4      = tlUpsSnmpCardSerialNum
    Obj4Value = The serial number of the SNMPWEBCARD [should be 0 on PC]
    
    --- if this trap is extended, place all static OIDs above this mark. all objects below
    --- the number of devices (tlNumDevices) is explicit as per device for enumeration by
    --- the target receiver
    
    OBJ5      = tlNumDevices
    Obj5Value = The number of devices attached

    --- The following objects will be replicated per each device:

    OBJ6      = The OID for an entry of tlDevManufacturer, indexed by device
    Obj6Value = The device's manufacturer
    OBJ7      = The OID for an entry of tlDevModel, indexed by device
    Obj7Value = The device's model name
    OBJ8      = The OID for an entry of tlDevName, indexed by device
    Obj8Value = The device's display name
    OBJ9      = The OID for an entry of tlDevLocation, indexed by device
    Obj9Value = The device's location
    OBJ10     = The OID for an entry of tlDevRegion, indexed by device
    Obj10Value= The device's region
    OBJ11     = The OID for an entry of tlDevProtocol, indexed by device
    Obj11Value= The device's protocol (display string format)
    "
  ::= { tlUpsTraps 6 }

--------------------------------------------------------------------------
--------------------------------------------------------------------------
--- end new traps
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
-- EnviroSense Device
--------------------------------------------------------------------------

tlEnviroSense OBJECT IDENTIFIER   ::= { tripplite 101 }

tlEnvEnvironment OBJECT IDENTIFIER   ::= { tlEnviroSense 1 }

tlEnvTemperatureData OBJECT IDENTIFIER   ::= { tlEnvEnvironment 1 }

tlEnvTemperatureC OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The ambient temperature (C)."
  ::= { tlEnvTemperatureData 1 }

tlEnvTemperatureF OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The ambient temperature (F)."
  ::= { tlEnvTemperatureData 2 }

tlEnvTemperatureLowLimit OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The lower alarm limit for ambient temperature (F)."
  ::= { tlEnvTemperatureData 3 }

tlEnvTemperatureHighLimit OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The upper alarm limit for ambient temperature (F)."
  ::= { tlEnvTemperatureData 4 }

tlEnvTemperatureInAlarm OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Indicates whether or not temperature is in alarm."
  ::= { tlEnvTemperatureData 5 }

tlEnvHumidityData OBJECT IDENTIFIER   ::= { tlEnvEnvironment 2 }

tlEnvHumidity OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The ambient humidity (%)."
  ::= { tlEnvHumidityData 1 }

tlEnvHumidityLowLimit OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The lower alarm limit for ambient humidity (%)."
  ::= { tlEnvHumidityData 2 }

tlEnvHumidityHighLimit OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The upper alarm limit for ambient humidity (%)."
  ::= { tlEnvHumidityData 3 }

tlEnvHumidityInAlarm OBJECT-TYPE
  SYNTAX TruthValue
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Indicates whether or not humidity is in alarm."
  ::= { tlEnvHumidityData 4 }

tlEnvContacts OBJECT IDENTIFIER  ::= { tlEnviroSense 2 }

tlEnvContactTable OBJECT-TYPE
  SYNTAX SEQUENCE OF TlEnvContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "A table of contacts."
  ::= { tlEnvContacts 1 }

tlEnvContactEntry OBJECT-TYPE
  SYNTAX TlEnvContactEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
    "An entry containing information applicable to a particular contact."
  INDEX {
    tlEnvContactIndex }
  ::= { tlEnvContactTable 1 }

TlEnvContactEntry ::= SEQUENCE {
  tlEnvContactIndex    PositiveInteger,
  tlEnvContactName     DisplayString,
  tlEnvContactStatus   INTEGER,
  tlEnvContactConfig   INTEGER }

tlEnvContactIndex OBJECT-TYPE
  SYNTAX PositiveInteger
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The table row index for the contact."
  ::= { tlEnvContactEntry 1 }

tlEnvContactName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The name or description of the contact."
  ::= { tlEnvContactEntry 2 }

tlEnvContactStatus OBJECT-TYPE
  SYNTAX INTEGER {
      normal(0),
      alarm(1) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current status of the contact."
  ::= { tlEnvContactEntry 3 }

tlEnvContactConfig OBJECT-TYPE
  SYNTAX INTEGER {
      normallyOpen(0),
      normallyClosed(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The configuration of the contact."
  ::= { tlEnvContactEntry 4 }


--------------------------------------------------------------------------
-- KVM over IP Device
--------------------------------------------------------------------------

-- this is a 3rd party MIB structure located at { tripplite 102 }

--------------------------------------------------------------------------
-- SR Cooling Device
--------------------------------------------------------------------------

tlCooling OBJECT IDENTIFIER   ::= { tripplite 103 }

tlCoolingEnvironment OBJECT IDENTIFIER   ::= { tlCooling 1 }

tlCoolingIdent  OBJECT IDENTIFIER   ::= { tlCoolingEnvironment 1 }
  
tlCoolingModel OBJECT-TYPE
  SYNTAX DisplayString 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The model name for the AC Unit."
  ::= { tlCoolingIdent 1}
  
tlCoolingManufacturer OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The manufacturer of the AC Unit."
  ::= { tlCoolingIdent 2 }

tlCoolingSerialNumber OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The serial number of the AC unit."
  ::= { tlCoolingIdent 3 }
  
tlCoolingFirmwareVersion OBJECT-TYPE
  SYNTAX DisplayString 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The firmware version of the AC Unit."
  ::= { tlCoolingIdent 4 }
  
tlCoolingHostSoftwareVersion OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The hardware version of the AC unit."
  ::= { tlCoolingIdent 5 }
  
tlCoolingName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The user defined name for the AC Unit."
  ::= { tlCoolingIdent 6 }
  
tlCoolingLocation OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The user defined location of the AC Unit."
  ::= { tlCoolingIdent 7 }

tlCoolingStatus  OBJECT IDENTIFIER   ::= { tlCoolingEnvironment 2 }

tlCoolingCondOutletTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The condenser outlet air stream temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 1 }

tlCoolingCondInletTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The condenser inlet air stream temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 2 }
  
tlCoolingRefrigerantTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The temperature of the refrigerant in the suction line.  This is displayed in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 3 }
  
tlCoolingEvapSurfaceTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The surface temperature of the evaporator in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 4}
  
tlCoolingSuctionPressure OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The pressure of the compressor suction line in tenths of (Mpa/psi) depending on the value of tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 5}
  
tlCoolingDischargePressure OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The pressure of the compressor discharge line in tenths of (Mpa/psi) depending on the value of tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 6}
  
tlCoolingEvapFanSpeed OBJECT-TYPE
  SYNTAX INTEGER {
      off(0),
      low(1),
      medLow(2),
      med (3),
      medHi (4),
      hi (5) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current speed of the evaporator fan."
  ::= { tlCoolingStatus 7}
  
tlCoolingCondFanSpeed OBJECT-TYPE
  SYNTAX INTEGER {
      off(0),
      low(1),
      hi (2) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current speed of the condenser fan."
  ::= { tlCoolingStatus 8}
  
tlCoolingCompFrequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The operating frequency of the compressor in tenths of Arms."
  ::= { tlCoolingStatus 9}
  
tlCoolingEEVPercentage OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The opening percentage of the EEV."
  ::= { tlCoolingStatus 10}
  
tlCoolingUnitCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The the total current draw of the unit in tenths of Arms."
  ::= { tlCoolingStatus 11}
  
tlCoolingFanCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Thethe current draw of the Evaporator and Condenser fans in tents of Arms."
  ::= { tlCoolingStatus 12 }
  
tlCoolingCompCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The operating current of the compressor in Arms."
  ::= { tlCoolingStatus 13}
  
tlCoolingReturnAirTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The return air temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 14 }

tlCoolingSuctionTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The temperature of the compressor suction line in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 15 }

tlCoolingSupplyAirTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The supply air temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlCoolingDisplayUnits."
  ::= { tlCoolingStatus 16 }

tlCoolingRunTimes OBJECT IDENTIFIER   ::= { tlCoolingEnvironment 3 }

tlCoolingAirFilterRunHours OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total hours the air filter has been under operation."
  ::= { tlCoolingRunTimes 1 }

tlCoolingEvapFanRunDays OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total days the evaporator fan has been under operation."
  ::= { tlCoolingRunTimes 2 }

tlCoolingCondFanRunDays OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total days the condenser fan has been under operation."
  ::= { tlCoolingRunTimes 3 }
  
tlCoolingCompressorRunDays OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total days the compressor has been under operation."
  ::= { tlCoolingRunTimes 4 }

tlCoolingCondPumpRunDays OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total days the condensate pump has been under operation."
  ::= { tlCoolingRunTimes 5 }
  
tlCoolingAtomizerRunDays OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Total days the atomizer has been under operation."
  ::= { tlCoolingRunTimes 6 }

tlCoolingConfig  OBJECT IDENTIFIER   ::= { tlCoolingEnvironment 4 }

tlCoolingOnOff OBJECT-TYPE
  SYNTAX INTEGER {
      turnOffUnit(0),
      turnOnUnit(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Turn the unit off or on."
  ::= { tlCoolingConfig 1 }

tlCoolingSetPointTemp OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The set point temperature the unit will control the temperature to in tenths of degrees in Celsius or Fahrenheit based upon tleCoolDisplayUnits."
  ::= { tlCoolingConfig 2 }

tlCoolingAutoStart OBJECT-TYPE
  SYNTAX INTEGER {
      disabled(0),
      enabled(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Specified if the unit should start automatically on power up."
  ::= { tlCoolingConfig 3 }

tlCoolingFanSpeedOverride OBJECT-TYPE
  SYNTAX INTEGER {
      autoFanSpeed(0),
      low(1),
      medLow(2),
      med(3),
      medHi(4),
      hi(5) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Speed of evaporator fan set by the user."
  ::= { tlCoolingConfig 4 }

tlCoolingControlType OBJECT-TYPE
  SYNTAX INTEGER {
      returnAirTemp(0),
      remoteTemperature(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Which temperature to be used as a control point."
  ::= { tlCoolingConfig 5 }

tlCoolingCurrentRemoteTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The external remote temperature in tenths of degrees in Celsius or Fahrenheit depending upon value of tlCoolingDisplayUnits"
  ::= { tlCoolingConfig 6 }

tlCoolingDisplayUnits OBJECT-TYPE
  SYNTAX INTEGER {
      metric(0),
      english(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Selects English or Metric display for all readings."
  ::= { tlCoolingConfig 7 }

tlCoolingBeepOnKey OBJECT-TYPE
  SYNTAX INTEGER {
      noBeep(0),
      beepOn(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Indicates if the display sounds a beep when a key is pressed."
  ::= { tlCoolingConfig 8 }

tlCoolingOutputRelaySource OBJECT-TYPE
  SYNTAX INTEGER {
      disabled(0),
      allAlarmsAndWarnings(1),
      criticalAlarmsOnly(2) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The alarm level that causes the ouput relay to activate."
  ::= { tlCoolingConfig 9 }

tlCoolingOffOnLeak OBJECT-TYPE
  SYNTAX INTEGER {
      turnOff(0),
      alarmOnly(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Indicates if the unit should stop cooling when leak input is activated."
  ::= { tlCoolingConfig 10 }

tlCoolingOffOnInputContact OBJECT-TYPE
  SYNTAX INTEGER {
      turnOff(0),
      alarmOnly(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Indicates if the unit should stop cooling when input contact is activated."
  ::= { tlCoolingConfig 11 }

tlCoolingInputContactType OBJECT-TYPE
  SYNTAX INTEGER {
      ncRelay(0),
      noRelay(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The input contact type."
  ::= { tlCoolingConfig 12 }

tlCoolingOutputRelayDefault OBJECT-TYPE
  SYNTAX INTEGER {
      nc(0),
      no(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Type of contact to make when output relay is activated."
  ::= { tlCoolingConfig 13 }

tlCoolingAirFilterInterval OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The number of weeks before the air filter needs to be changed."
  ::= { tlCoolingConfig 14 }

tlCoolingWaterLeakContactType OBJECT-TYPE
  SYNTAX INTEGER {
      noRelay(0),
      ncRelay(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The input contact type."
  ::= { tlCoolingConfig 15 }

tlCoolingThresholds  OBJECT IDENTIFIER   ::= { tlCoolingEnvironment 5 }

tlCoolingMaxAirFilterRunHours OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The maximum interval for air filter run hours before warning is annunciated."
  ::= { tlCoolingThresholds 1 }
  
tlCoolingEnableAirFilterAlarm OBJECT-TYPE
  SYNTAX INTEGER {
      disabled(0),
      enabled(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "When enabled indicated that an alarm should occur when the maximum number of air filter run hours has been exceeded."
  ::= { tlCoolingThresholds 2 }
  
tlCoolingMaxSupplyTemp  OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Maximum allowed supply air temperature before firing an alarm."
  ::= { tlCoolingThresholds 3 }
  
tlCoolingMinSupplyTemp  OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Minimum allowed supply air temperature allowed before firing an alarm."
  ::= { tlCoolingThresholds 4 }
  
tlCoolingTempDiffAlarm  OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Maximum allowed air temperature deviation from set allowed before firing an alarm."
  ::= { tlCoolingThresholds 5 }
  
tlCoolingMaxReturnAirTemp  OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "When enabled indicated that an alarm should occur when the maximum number of air filter run hours has been exceeded."
  ::= { tlCoolingThresholds 6 }

tlCoolingAlarm OBJECT IDENTIFIER   ::= { tlCooling 6 }

tlCoolingWellKnownAlarms OBJECT IDENTIFIER   ::= { tlCoolingAlarm 3 }

tlCoolingSupplyAirSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The supply air sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 1 }

tlCoolingReturnAirSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The return air sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 2 }

tlCoolingCondenserInletAirSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The condenser inlet air sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 3 }

tlCoolingCondenserOutletAirSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The condenser outlet air sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 4 }

tlCoolingSuctionTemperatureSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The suction temperature sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 5 }

tlCoolingEvaporatorTemperatureSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The evaporator temperature sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 6 }

tlCoolingAirFilterClogged OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The air filter is clogged."
    ::= { tlCoolingWellKnownAlarms 7 }

tlCoolingAirFilterRunHoursViolation OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The air filter run hours was violated."
    ::= { tlCoolingWellKnownAlarms 8 }

tlCoolingSuctionPressureSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The suction pressure sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 9 }

tlCoolingInverterCommunicationsFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The inverter communications is in fault."
    ::= { tlCoolingWellKnownAlarms 10 }

tlCoolingRemoteShutdownViaInputContact OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "A remote shutdown was triggerd by an input contact."
    ::= { tlCoolingWellKnownAlarms 11 }

tlCoolingCondensatePumpFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The condensate pump is in fault."
    ::= { tlCoolingWellKnownAlarms 12 }

tlCoolingLowRefrigerantStartupFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The low refrigerant startup is in fault."
    ::= { tlCoolingWellKnownAlarms 13 }

tlCoolingCondenserFanFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The condenser fan is in fault."
    ::= { tlCoolingWellKnownAlarms 14 }

tlCoolingCondenserFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The condenser has failed."
    ::= { tlCoolingWellKnownAlarms 15 }

tlCoolingEvaporatorCoolingFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The evaporator cooling is in fault."
    ::= { tlCoolingWellKnownAlarms 16 }

tlCoolingReturnAirTempHigh OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The return air temperature is high."
    ::= { tlCoolingWellKnownAlarms 17 }

tlCoolingSupplyAirTempHigh OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The supply air temperature is high."
    ::= { tlCoolingWellKnownAlarms 18 }

tlCoolingEvaporatorFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The evaporator has failed."
    ::= { tlCoolingWellKnownAlarms 19 }

tlCoolingEvaporatorFreezeUp OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The evaporator is frozen."
    ::= { tlCoolingWellKnownAlarms 20 }

tlCoolingDischargePressureHigh OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The discharge pressure is high."
    ::= { tlCoolingWellKnownAlarms 21 }

tlCoolingPressureGaugeFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The pressure gauge has failed."
    ::= { tlCoolingWellKnownAlarms 22 }

tlCoolingDischargePressurePersistentHigh OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The discharge pressure is persistently high."
    ::= { tlCoolingWellKnownAlarms 23 }

tlCoolingSuctionPressureLowStartFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Cannot start due to low suction pressure."
    ::= { tlCoolingWellKnownAlarms 24 }

tlCoolingSuctionPressureLow OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The suction pressure is low."
    ::= { tlCoolingWellKnownAlarms 25 }

tlCoolingSuctionPressurePersistentLow OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The suction pressure is persistently low."
    ::= { tlCoolingWellKnownAlarms 26 }

tlCoolingStartupLinePressureImbalance OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The startup line pressure is in imbalance."
    ::= { tlCoolingWellKnownAlarms 27 }

tlCoolingCompressorFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The compressor has failed."
    ::= { tlCoolingWellKnownAlarms 28 }

tlCoolingCurrentLimit OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The current is out of range."
    ::= { tlCoolingWellKnownAlarms 29 }

tlCoolingWaterLeak OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Water is leaking."
    ::= { tlCoolingWellKnownAlarms 30 }

tlCoolingFanUnderCurrent OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The fan is under current."
    ::= { tlCoolingWellKnownAlarms 31 }

tlCoolingFanOverCurrent OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The fan is over current."
    ::= { tlCoolingWellKnownAlarms 32 }

tlCoolingDischargePressureSensorFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The discharge pressure sensor is in fault."
    ::= { tlCoolingWellKnownAlarms 33 }

tlCoolingWaterFull OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Water is Full."
    ::= { tlCoolingWellKnownAlarms 34 }

tlCoolingAutoCoolingOn OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "Automatic cooling was activated to lower the temperature below the
    remote set point."
  ::= { tlCoolingWellKnownAlarms 35 }

tlCoolingPowerButtonPressed OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "Power button was pressed on the front panel."
  ::= { tlCoolingWellKnownAlarms 36 }

tlCoolingDisconnectedFromDevice OBJECT-IDENTITY
  STATUS     current
  DESCRIPTION
    "The device communications is disconnected."
  ::= { tlCoolingWellKnownAlarms 37 }


--------------------------------------------------------------------------
-- SRCOOLNET Device
--------------------------------------------------------------------------

tlSrCoolNet OBJECT IDENTIFIER   		::= { tripplite 104}

tlSrCoolNetData OBJECT IDENTIFIER   		::= { tlSrCoolNet 1 }

tlSrCoolNetIdent  OBJECT IDENTIFIER   		::= { tlSrCoolNetData 1 }
  
tlSrCoolNetModel OBJECT-TYPE
  SYNTAX DisplayString 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The model name for the device attached to the SRCOOLNET."
  ::= { tlSrCoolNetIdent 1}
  
tlSrCoolNetManufacturer OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The manufacturer of the AC Unit."
  ::= { tlSrCoolNetIdent 2 }

tlSrCoolNetSerialNumber OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The serial number of the SRCOOLNET device."
  ::= { tlSrCoolNetIdent 3 }
  
tlSrCoolNetHostSoftwareVersion OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The software version of the SRCOOLNET device."
  ::= { tlSrCoolNetIdent 4 }
  
tlSrCoolNetName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The user defined name for the AC Unit."
  ::= { tlSrCoolNetIdent 5 }
  
tlSrCoolNetLocation OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The user defined location of the AC Unit."
  ::= { tlSrCoolNetIdent 6 }

tlSrCoolNetStatus  OBJECT IDENTIFIER   		::= { tlSrCoolNetData 2 }

tlSrCoolNetMode OBJECT-TYPE
  SYNTAX INTEGER {
      off (0),
      idle (1),
      cooling (2),
      unknown (3),
      dehumidifying (4),
      defrost (5),
      notconnected(6) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current mode of SRCOOLNET."
  ::= { tlSrCoolNetStatus 1}

tlSrCoolNetFanSpeed OBJECT-TYPE
  SYNTAX INTEGER {
      off (0),
      low (1),
      med (2),
      hi  (3) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The current speed of the fan."
  ::= { tlSrCoolNetStatus 2}

tlSrCoolNetReturnAirTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The return air stream temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlSrCoolNetDisplayUnits."
  ::= { tlSrCoolNetStatus 3 }

tlSrCoolNetWaterFull OBJECT-TYPE
  SYNTAX INTEGER {
      waterNotFull(0),
      waterFull(1) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Indicates the water reservoir is full or not full."
  ::= { tlSrCoolNetStatus 4 }

tlSrCoolNetCurrentRemoteTemp OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "The EnviroSense temperature in tenths of degrees in Celsius or Fahrenheit depending upon value of tlSrCoolNetDisplayUnits.
    Only available if EnviroSense is connected to SRCOOLNET."
  ::= { tlSrCoolNetStatus 5 }

  tlSrCoolNetDisplayUnits OBJECT-TYPE
  SYNTAX INTEGER {
      metric(0),
      english(1) }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
    "Selects English or Metric display for all readings. AC unit must be manually configured to match this setting."
  ::= { tlSrCoolNetStatus 6 }


tlSrCoolNetConfig  OBJECT IDENTIFIER   		::= { tlSrCoolNetData 3 }

tlSrCoolNetOnOff OBJECT-TYPE
  SYNTAX INTEGER {
      turnOffUnit(0),
      turnOnUnit (1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Turn the unit off or on."
  ::= { tlSrCoolNetConfig 1 }

tlSrCoolSetMode OBJECT-TYPE
  SYNTAX INTEGER {
      cooling(0),
      dehumidifying (1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set the operating mode of cooling unit.  Unit must be ON to set mode."
  ::= { tlSrCoolNetConfig 2 }

tlSrCoolNetSetPointTemp OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The local set point temperature in tenths of degrees in Celsius or Fahrenheit based upon tlSrCoolNetDisplayUnits."
  ::= { tlSrCoolNetConfig 3 }

tlSrCoolNetRemoteSetPointTemp OBJECT-TYPE
  SYNTAX INTEGER 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "The remote set point temperature in tenths of degrees in Celsius or Fahrenheit based upon tlSrCoolNetDisplayUnits.
    Only available when EnviroSense is connected to SRCOOLNET."
  ::= { tlSrCoolNetConfig 4 }

tlSrCoolNetFanSpeedSetting OBJECT-TYPE
  SYNTAX INTEGER {
      auto(0),
      low(1),
      med(2), 
      high(3) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Set the fan speed of the AC unit."
  ::= { tlSrCoolNetConfig 5 }

tlSrCoolNetRemoteSetpointEnable OBJECT-TYPE
  SYNTAX INTEGER {
      disable(0),
      enable(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Use remote temperature setpoint for control point versus return air temp.  Only available when EnviroSense is connected
    to SRCOOLNET."
  ::= { tlSrCoolNetConfig 6 }

tlSrCoolNetFanAlwaysOn OBJECT-TYPE
  SYNTAX INTEGER {
      disable(0),
      enable(1) }
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
    "Leave fans on when not cooling.  Only available when EnviroSense is connected to SRCOOLNET."
  ::= { tlSrCoolNetConfig 7 }



tlSrCoolNetAlarm OBJECT IDENTIFIER   			::= { tlSrCoolNet 2 }

tlSrCoolNetWellKnownAlarms OBJECT IDENTIFIER   		::= { tlSrCoolNetAlarm 1 }

tlSrCoolNetWaterFullAlarm OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "Water reservoir full."
    ::= { tlSrCoolNetWellKnownAlarms 1 }

--------------------------------------------------------------------------
-- Conformance definitions
--------------------------------------------------------------------------

tlConformance OBJECT IDENTIFIER   ::= { tripplite 20 }

tlCompliances OBJECT IDENTIFIER   ::= { tlConformance 1 }

tlGroups OBJECT IDENTIFIER  ::= { tlConformance 2 }

tlSubsetGroups OBJECT IDENTIFIER  ::= { tlGroups 1 }

tlBasicGroups OBJECT IDENTIFIER   ::= { tlGroups 2 }

tlFullGroups OBJECT IDENTIFIER  ::= { tlGroups 3 }

tlUpsFullGroups OBJECT IDENTIFIER   ::= { tlFullGroups 100 }

tlUpsFullIdentGroup OBJECT-GROUP
  OBJECTS {
    tlUpsIdentUpsSoftwareChecksum,
    tlUpsIdentSerialNum,
    tlUpsIdentID,
    tlUpsSelectedDeviceID }
  STATUS current
  DESCRIPTION
    "The tlUpsFullIdentGroup defines objects which are common to the Ident
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 1 }

tlUpsFullBatteryGroup OBJECT-GROUP
  OBJECTS {
    tlUpsBatteryAge,
    tlUpsTemperatureF }
  STATUS current
  DESCRIPTION
    "The tlUpsFullBatteryGroup defines objects which are common to the Battery
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 2 }

tlUpsFullAlarmGroup OBJECT IDENTIFIER   ::= { tlUpsFullGroups 6 }

tlUpsFullAlarmObjsGroup OBJECT-GROUP
  OBJECTS {
    tlUpsAlarmDevName,
    tlUpsAlarmDevLocation,
    tlUpsAlarmCategory }
  STATUS current
  DESCRIPTION
    "The tlUpsFullAlarmObjsGroup defines objects which are common to
    the Alarm group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullAlarmGroup 1 }

--tlUpsFullAlarmsGroup NOTIFICATION-GROUP
--  NOTIFICATIONS { }
--  STATUS current
--  DESCRIPTION
--    "The tlUpsFullAlarmGroup defines notifications which are
--    common to the Alarm group of fully compliant Tripplite UPS's"
--  ::= { tlUpsFullAlarmGroup 2 }

tlUpsFullTestGroup OBJECT-GROUP
  OBJECTS {
    tlUpsTestDate,
    tlUpsTestResultsDetail }
  STATUS current
  DESCRIPTION
    "The tlUpsFullTestGroup defines objects which are common to the Test
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 7 }

tlUpsFullControlGroup OBJECT-GROUP
  OBJECTS {
    tlUpsWatchdogSupported,
    tlUpsWatchdogSecsBeforeReboot }
  STATUS current
  DESCRIPTION
    "The tlUpsFullControlGroup defines objects which are common to the Control
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 8 }

tlUpsFullConfigGroup OBJECT-GROUP
  OBJECTS {
    tlUpsConfigBattReplDate }
  STATUS current
  DESCRIPTION
    "The tlUpsFullConfigGroup defines objects which are common to the Config
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 9 }

tlUpsFullOutletGroup OBJECT-GROUP
  OBJECTS {
    tlUpsOutletNumOutlets }
  STATUS current
  DESCRIPTION
    "The tlUpsFullOutletGroup defines objects which are common to the Outlet
    group of fully compliant Tripplite UPS's"
  ::= { tlUpsFullGroups 10 }


END
